RISK MANAGEMENT FOR MEDICAL DEVICES AND ISO 14971:2019
- Online course
- EU and US requirements
- Beginner - intermediate
- Last updated - March 2026
Enhance risk management competency, be efficient in risk management processes with this self-paced, interactive online course.
- Understand risk management process and enhance risk management competency.
- Ensure conformity with ISO 14971:2019.
- Improve team communication with a common language.
- Develop essential skills for risk analysis, risk evaluation, risk control, and acquire knowledge of risk management tools like FMEA.
- Streamline risk management processes for efficiency.
Welcome to this short course on risk management for medical devices and ISO 14971. I'm Peter Sebelius, and I have worked with medical device product development and risk management for 20 years now. And I don't think there is anything that is more interesting to work with than that. I am a member of the joint working group authoring the ISO 14971 standard, and in this video, I would like to bring you up to speed on risk management. I will be showing you what risk management is, the general requirements of risk management, risk analysis, risk evaluation, and risk control, and everything that comes thereafter. You will also be briefed on the difference between ISO 14971 risk management and FMEA, and why only doing FMEA does not meet the regulatory requirements. The goals of this short course are that you should get a basic understanding of what risk management for medical devices is and why you should care about it. And based on that, you should be able to figure out if the full course of risk management that we offer on medicaldevicehq.com could help you in your job or career. The full course is similar to this one, but much more comprehensive, with more in-depth information and quizzes at the end of each topic to test your knowledge and understanding. On the full course, you will also receive, of course, a certificate at the end, which many auditors will be looking for. Being a medical device manufacturer, you are expected to implement a risk management process, according to ISO 14971. This is the expectation from both notified bodies, as well as the FDA, meaning this is something you should do if you are or are planning to sell a product to the EU or US. The goal of risk management is to create safe products. But what does that mean? Does it mean that there is no risk associated with using the device, or that it is fail-safe or maybe even single fault safe? Now, many people would define safe, or safety, as free from risk. And if that was possible to achieve, that would have been great. But it is not, because there is no such thing. There are risks associated with everything. Not even being alive is free from risk. And the same can be said of using medical devices. Now, this brings us to the ISO 14971 definition of safety. The definition is as simple as it is ingenious, and it also communicates what you should achieve in every project or for every product. In the ISO 14971, safety is defined as freedom from unacceptable risk. That is what you want to achieve freedom from, unacceptable risk. That is, indeed, a very clever definition. Now, working with medical devices is both a privilege, because we can make a difference in people's lives. The products we make reduce pain, treat diseases, and improves quality of life. But this comes with great responsibility, because when we fail, the consequences will be on others. That is a big responsibility. And in addition to risk management being a regulatory requirement, it is a strong argument for working with risk management, if you ask me. So what is risk management? Many of us would think of a table similar to this one when thinking of risk management. And this is indeed a very important part of risk management. This table is where you would document the hazards, harms, estimated risk, and define how to reduce risks. Some people would refer to this as the risk analysis, or an FMEA. I call it a hazard traceability matrix. If you develop or manufacture medical devices, you need to work with risk management. Risk management is not only relating to the use, design, and manufacturing of a medical device. You need to have a risk management process that covers all lifecycle phases of your medical device, from initial conception to decommissioning or scrapping. This means that you should include risks arising from things such as poor design failure in production processes, rough handling during shipping, misuse by a user, failure in sterilization if you have a sterile product, component failures, and risks arising from decommissioning. And those risks should be taken through the complete process of risk management and be documented. Please note that your medical device may very well have different lifecycle phases than in this example. The requirement on addressing risks from all lifecycle phases also means that if you provide services or components or materials to a medical device manufacturer, you should also be engaged in risk management in one or another way. Working with risk management is required in the quality system regulation that applies to you if you want to sell your medical devices to the US. Working with risk management is also required in the medical device regulation that applies to you if you want to sell your medical devices to the EU. In fact, risk management is mentioned quite a few times in the Medical Device Regulation, or short, MDR. Just like the ISO 14971, MDR requires you to have a risk management system. And there are a lot of requirements on what your product should be like in regards to risk and safety. These product-specific requirements are found in Annex 1 in the MDR General Safety and Performance Requirements. So let's look at an example of what it is you have to do in the risk management process from start to end. Firstly, you should have a procedure in your company that will tell you how you should be working with risk management. The procedure, in turn, should require you to make a plan for the risk management work that is to be done for a product or product group. The plan should, among other things, outline who is responsible for what in risk management. Speaking of the persons performing risk management, both notified bodies and the FDA and the ISO 14971 standard require people performing risk management to be competent. And having records proving the competence is also a requirement. This could, for example, be a course certificate from the full online course you can find on medicaldevicehq.com. For all your medical devices, you must do risk analysis. Risk analysis starts with hazards. Hazards are potential sources of harm. The next step is to identify reasonably foreseeable sequences or combinations of events that could lead to hazardous situations and harms. When you have done that, you should estimate the risk by determining the probability of occurrence of harm and the severity of that harm. This is the process, which, in the standard, is referred to as risk analysis. The example you can see here is from a heart lung machine, and a risk that comes from a mistake being done in production. But we could, and should, apply the same process regardless of what type of risk we are referring to. Heart lung machines are used for, for example, bypass surgery, and they are electrically powered. So already, on day one in the development of this type of product, we could say that a potential source of harm would be electricity. This is one of the key advantages of risk management done according to ISO 14971, and that is that you start with open-ended hazards that will lead you to the identification of potential risks in really early stages of the development. Based on the hazard in this example, we came up with a sequence of events where a person in production, by mistake, connects a live cable to ground, which makes the whole device casing live. The user is exposed to electricity, which, in some cases, could kill you. Not every time, I admit, but it could kill you. So we write up death as the harm in this example. The next step is to estimate the risk. But what is risk? In the ISO 14971 standard, risk is defined as the combination of probability of occurrence of harm and the severity of that harm. Speaking of probability of occurrence of harm, it is very common to abbreviate it, as in this example, with just Po. Also, severity is oftentimes abbreviated to S, as in Severity. We're going to start by looking at estimating the probability of occurrence of harm. Now, when you estimate the probability of occurrence of harm, you should think of your product as if you haven't implemented any risk control measures at all, meaning that the probability is fairly high. On a scale from 1 to 5, we set it to 3. I know this might feel strange to do, but it is both a good idea and a requirement to estimate the probability of occurrence of harm before risk control measures. The severity is based on the harm, which, in this case, was death. This will be the highest severity, meaning 5, on another 1 to 5 graded scale. This should not come as a big surprise. This results in an unacceptable risk in the risk evaluation matrix, here indicated with N ACC, short for Not Acceptable. The risk evaluation concludes that this risk is far from acceptable. The next step would be to look at what we could do to reduce this risk. This is called risk control options analysis. The most effective way of reducing risk is to completely take away the hazard, in this case, the electricity. But we are not going to resort to having heart lung machines with hand cranks only, so the electricity would have to stay in there. What we could do, however, is to apply protective measures, which is the second-most effective way of reducing risk. The detailed solution to this risk would be to design the cables so that they cannot be connected to ground, thereby ruling out connection errors. We should also perform a final test in production that includes electrical safety tests that will detect this kind of mistake. Now that we've decided what to do, we need to prove that this actually works like intended. This would be called verification of effectiveness. We would be analyzing the cable connection errors to ensure that there is no way we can connect the cable incorrectly. This could be done either theoretically or practically or both. Regardless, of how we do it, we should keep records of it. We would also like to prove that the final test actually does detect this kind of error. To do that, we might bring in a cable with the wrong length that would actually allow us to make an incorrect connection, and then test the device and make sure that the final test detected it. This would be a fault injection test. Now, if you do this type of testing, make sure you don't electrocute yourself or your colleagues. Even though we have decided what to do, and we check that it works, we also need to make sure that we have actually implemented these risk controls in the product. Maybe you tested the electrical safety tester, but never put it into production and started using it in the final test. And what good would it do then? In this example, you can see the column with an abbreviated Implementation. This is where we will check off that we have actually done what we said we would do. And then lastly in risk control, we should estimate the residual risk and determine whether the risk is now acceptable after the risk control measures have been implemented. In this case, it is, which is shown with the green color and the letters ACC, short for Acceptable. Risk analysis, risk evaluation, and risk control would not be just the single row of text like in this example. It's likely to be at least 100 rows, with risks relating to the various types of risks that would be present throughout the lifecycle of your medical device. And that should be risks from any of the life cycles, between initial conception and final decommissioning. And that was a brief overview of risk analysis, risk evaluation, and risk control. If you need a template of the table we just looked at, look for Hazard Traceability Matrix on medicaldevicehq.com, where you can download the table for free. After having worked with risk management in your new product development project, there are three things you need to ask yourself. Firstly, was the risk management implemented appropriately, and according to what you planned in your risk management plan that was mentioned before? If not, go back and do it right. The second question relates to whether the overall residual risk is acceptable. It might be that all individual risks are actually acceptable, but there are so many of them that still you cannot justify the release of the product to market. And lastly, are methods in place for collection and review of production and post-production information? Big surprise-- risk management doesn't end with the product development project. It is supposed to continue for quite some time-- in fact, until your product is no longer used. And you need to keep on updating your risk management file. That should be done using data from any source you can come up with. It would definitely include data from production, complaints, post-market surveillance, and updates of your clinical evaluation report. The results of your risk management review should go into the risk management report. At the end of your development project, you should also establish a risk management file, which is a set of records and documents that are outputs from your risk management process. A practical way to define what is part of the risk management file is to create an index pointing out all the documents and records that are relevant to risk management. Thereafter, you should continue with production and post-production activities. Sometimes, you will learn frightening things, like about risks that you did not identify. And sometimes, you will learn good things, for example, that certain risks don't occur as often as you thought they would. Production and post-production activities are about closing the loop to make risk management a continuous lifecycle process, meaning that we keep updating our risk management fought to make sure that it is accurate and up to date. In this image, you can see how production and post-production activities feed back information into the risk analysis, risk evaluation, and risk control processes, which is exactly what should happen over and over again. On a side note, this is an area in the new standard that has been expanded greatly compared to the last version of the standard, which was not at all as comprehensive in this field. It's a very good change and update. Now, that was risk management according to ISO 14971 in a nutshell. I did this very concrete, short introduction to make it as tangible as possible for you, who are an absolute beginner to this field. If you're already experienced in the field of risk management, I'm sure you recognize the things that I brought up so far. Now, how does all this relate to FMEA? This is what FMEA could look like. In this example, you can see a design FMEA, or D-FMEA. The D-FMEA looks at components and what failures of such components would lead to. In this example, you can see how design choices or design failures leads to a breakdown of system performance. The risk is measured using a RPN number, which is short for Risk Priority Number. The highest-ranking risks should be addressed first by mitigation, and just as in the case of ISO 14971, the residual risk is estimated, again, using the same technique as before mitigation. Having looked at these examples, you may have noticed that FMEA starts with details or components. You would be looking at how specific components or process steps could fail. And there was no mention of harm in this FMEA, was there? And since we only looked at failures, risks relating to normal use have not been included. Let's compare this with ISO 14971 risk management and highlight some of the major differences to FMEA. Risk management according to ISO 14971 would look at risks arising from both normal and fault conditions, where FMEA would only consider risks arising from fault conditions. And since FMEA starts with components or process step failures, by definition, it won't be possible to start until the design or production processes are fairly well known, which means in a late stage. ISO 14971 risk management, on the other hand, starts with hazards that can be identified at really early stages in the design lifecycle. Lastly, ISO 14971 will manage all risks from all lifecycle phases, and both normal use, reasonably foreseeable misuse, and in some cases, even abnormal use, whereas FMEA only aims to improve reliability of the design or process. So now you've seen the major differences between ISO 14971 risk management and FMEA, according to the IEC 60812 standard. It's important to remember that if you only use FMEA, you do not meet the requirements of the ISO 14971 standard, and this, in turn, usually means that you do not meet the requirements of the medical device regulation, nor are you likely to meet FDA's expectations or risk management in the US. Thanks for watching this short course. Do you need templates to give you inspiration, or do you require more knowledge or risk management? You can find free risk management templates, or you can purchase the full Introduction to Risk Management for Medical Devices and ISO 14971 2019 course on medicaldevicehq.com. We offer online courses, public classroom courses, as well as in-house training on risk management, design control, and project management for medical devices. Drop us a line of support at medicaldevicehq.com if you would like to learn more about your options or receive a proposal. Or email me on the same email address if you have a question relating to risk management. Or, share what you think is most challenging in risk management. I hope to hear from you. [MUSIC PLAYING]
| Course length | approx. 6-16 hours (12 CPD points) |
Select your course plan
ONLINE
YOU ARE HERE
€ 399
Average completion time 6 - 16 hours
Total video duration 4 hours
CPD points 12
Number of quizzes 23
Final exam
Digital course companion
Course certificate
Ask the instructor
6 months access to the course and instructor
ONLINE LIFETIME
€ 499
Average completion time 6 - 16 hours
Total video duration 4 hours
CPD points 12
Number of quizzes 16
Number of quizzes 23
Final exam
Digital course companion
Course certificate
Ask the instructor
Lifetime access to the course and instructor
BLENDED
€ 999
Average completion time 13-23 hours
Total video duration 3.5 hours
CPD points 19
Number of quizzes 23
Final exam
Digital course companion
Course certificate
Ask the instructor
Lifetime access to the course and instructor
Digital course companion
Classroom sessions (2 * 3.5 hours)
Templates
ADVANCED
€ 499
Average completion time 9 - 25 hours
Total video duration 6 hours
CPD points 16
Number of quizzes 25
Final exam
Digital course companion
Course certificate
Ask the instructor
Lifetime access to the course and instructor
Templates
IN-HOUSE TRAINING
CONTACT US
Tailored training to meet your company's needs
SPECIAL OFFER
RISK MANAGEMENT 3-COURSE BUNDLE FOR ONLY €748
RISK MANAGEMENT + ADVANCED RISK MANAGEMENT + HOW TO CREATE A RISK MANAGEMENT PLAN
Become highly proficient in risk management for medical devices with our 3-course online bundle
at the special price of €748 (€1047 if bought separately). Additionally, you get upgraded to lifetime plans of the risk management courses for free.
Course overview
This online course focuses on risk analysis, evaluation and risk control. It covers an orientation of the risk management process according to the EN ISO 14971:2019 version of the standard as well as the standard’s relation to tools and techniques such as FMEA and P-FMEA.
The course is practical and is suitable for anyone working with risk management, such as R&D and QA engineers, product and application specialists and clinical research specialists.
It is made up of pre-recorded videos, quizzes, and a final exam. You will receive a course certificate upon successful completion of the course. There is also a downloadable course companion within the course.
If you purchase the ‘Online’ course plan you will have access to the course for 6 months from enrolment. If you purchase the ‘Online lifetime’ course plan you will have lifetime access (conditions apply).
- This course is CPD-accredited. You will receive a certificate awarding you CPD points following completion of the training.
- Medical Device HQ is a member of the Swedish standardisation committee TK355 developing standards such as ISO 13485, ISO 14971 and IEC 62366-1. Peter Sebelius has partaken in authoring all of the above standards at an international level.
Benefits for you
Become confident in doing risk management work
The goal is that upon completion of this course, you should understand the overall process of risk management and how to create safe medical devices.
You should also be able to participate in performing risk analysis, risk evaluation and risk control according to ISO 14971:2019. You should also be aware of different risk management tools and techniques, such as FMEA and P-FMEA.
Direct access to standards authors
Our courses are developed by members of the standardization committees involved at both national and international levels, ensuring you receive first-hand knowledge and insights.
You can ask our instructors questions during the online course thereby gaining exclusive up-to-the-minute information.
Self-paced and bite-sized learning
Our interactive online courses offer the flexibility to learn at your own pace. The high-quality videos are designed in bite-sized segments, making it easier to grasp and retain information.
This format provides a convenient alternative to traditional classroom courses accommodating different learning styles and preferences.
Peter Sebelius is a highly esteemed trainer, consultant and entrepreneur in the medical device industry. He is a member of the Joint Working Group that has authored the latest versions of ISO 13485 and ISO 14971 standards.
He has vast ‘hands on’ experience, having developed, amongst other things, a mechanical chest compression device and an ex vivo perfusion machine for lungs. He has received numerous awards including the Great Design Award and the title “This year’s specialist” by Veckans affärer.
Course modules
- Download your course companion – part 1
- Welcome
- What you need to know
- Set your course goal completion date
- Pre-course assessment quiz
- Why risk management and what it is? – Part 1
- Why risk management and what it is? – Part 2
- ISO 14971 vs FMEA
- The regulatory background for risk management
- The different versions of the standard
- What is new in ISO 14971:2019
- What is new in ISO 14971:2019/A11:2021
- Getting to know the standard
- The risk management process
- Calling things by their right names
- Management responsibility and training
- Risk management planning and file
- When and how to start
- Hazard identification
- Reasonably foreseeable sequence or combination of events
- Hazardous situations and harm
- How to work
- Download your course companion – Part 2
- Probability of occurrence of harm – Part 1
- Probability of occurrence of harm – Part 2
- Severity
- Risk evaluation
- Risk control option analysis – Part 1
- Risk control option analysis – Part 2
- Information for safety and disclosure of residual risk
- Risk controls and verification
- Estimating the residual risk and benefit
- Residual risk in EU
- Overall residual risk acceptability
- Risk management review
- Production and post-production activities
- Usability engineering
- Final Exam
- Course evaluation
Do you want this course on your internal LMS? Contact us
Frequently asked questions
The course is not a webinar. This online course is made up of carefully scripted pre-recorded videos to maximize your learning. You can watch it as many times as you like, whenever and wherever you want. You can not download the course though, thus you will need to have an internet connection to take the course.
All in all, the average time to complete the course is 6-16 hours, but you can complete it in less time if you don’t repeat any of the lessons and have just one attempt at the quizzes. Please note, you don’t have to watch the whole course at once. In fact you can pause, resume and replay as often as you like. The only limitation is the final exam, where you will only have one shot.
If you purchase the ‘Online’ course plan you will have access to the course for 6 months from enrolment. If you purchase the ‘Online lifetime’ course plan you will have lifetime access to the course if you complete the final exam within 6 months of enrolment (conditions apply).
You need to have contact with our servers for your results to register on the final exam. If your computer for some reason has a problem and does not allow you to send the result of the final exam to our servers, we recommend that you take a photo or a “print screen” of the screen with your results. E-mail this image to us and we will investigate if you have successfully completed the exam and therefore should receive a course certificate even though the result has not been registered, or if you have to do the final exam again.
There is no pass/fail on the final exam (as long as you complete it within the time frame). Your result will be printed on the course certificate which means you can be really proud of your result if you get between 90% and 100% of the answers correct!
The course certificate is available for download after completing the final exam. All you need to do is log in to your account, go to My Courses and scroll down. You will find it under Your Course Certificates.
Yes, you can download a course companion within the online course. It contains a selection of key slides from the course and is in PDF format.
We offer a number of payment methods including credit card, GooglePay, ApplePay, PayPal, wire transfer/invoice depending on the country you are buying from. If you cannot find your country on the list at checkout or you are not given wire transfer as a payment method, you can submit your order via our invoice order form.
If you purchase five seats for the same online course at the same time, we will give you one extra seat for free on that same course (e.g. buy 5 get 6, buy 10 get 12, etc). The free seat is assigned manually after the order has been received.
Medical Device HQ is proud to be an accredited CPD provider, demonstrating our commitment to your continued professional development with high-quality training courses.
A CPD record showcases your professional growth, boosts confidence in your abilities, and can be presented to management for better career opportunities.
As a participant of a CPD certified course, you will receive a certificate awarding you CPD points following completion of the training.
Reviews
Qualio
Kinomica
Compliance Specialist
GN Group
Omnec AB
QA Engineer
Tandem Diabetes Care
Serini
Luzmon Medical AS
Group purchase
If you wish to purchase two or more seats on the same online course, click the ‘Buy multiple seats’ button below which will take you to the product page where you can simply enter the number of seats you require.
If you purchase three seats or more on the same online course at the same time, you will be added to the Professional Plan for free. This means a group account will be created for you that you can manage. You will be able to track the participant’s course progress from your group account and view quiz results.
It is the person that places the order who will be our single-point-of-contact and group leader for the group account. If you wish to change this to someone else later on, you can email us at support@medicaldevicehq.com.