PRRC - PERSON RESPONSIBLE FOR REGULATORY COMPLIANCE
- Online course
- EU requirements
- Beginner - intermediate
- Last updated - Sep 2025
Learn about the role of the PRRC (Person Responsible for Regulatory Compliance) according to Article 15 in the MDR, and how to fulfil the requirements, during this self-paced, interactive online course.
Hi there! Are you looking for more information on how to fulfil the requirements of the person responsible for regulatory compliance according to the MDR in a practical way? Then you have come to the right place. My name is Pontus Gedda and I am the author of the online course Introduction to Person Responsible for Regulatory Compliance. I have worked in the medical device industry for over 20 years, and my interest for regulatory affairs brought me to the world of notified bodies in 2014. The notified body I worked for was designated for MDR under my management, and I am also an MDR lead auditor. Taking this short course will give you a better understanding of the PRRC role on a high level and hopefully get you interested in taking the full PRRC online course. Remember, it's mandatory for all manufacturers to have a PRRC available if you are CE marking medical devices according to the MDR. The PRRC requirements also applies to any European representative for those manufacturers needing that. Meaning if you are a manufacturer from outside the European Union, you need to have your own appointed PRRC, and the European representative also needs to have a PRRC, and that person cannot be the same person for both those roles. And if you are a manufacturer having a notified body, it's mandatory for that notified body to control that your PRRC has the right education and training, like a certificate from a specific PRRC course. The goals for this short course are for you to get a basic overview of the parts of the Medical Device Regulation related to the PRRC and understand the role of the PRRC under the MDR. Then, based on this, you should be able to decide if the full course on the PRRC that we offer on medicaldevicehq.com can help you in your job or career. The full course is similar to this one, but much more comprehensive, with more in-depth information and quizzes at the end of each topic to test your knowledge and understanding. You will also receive a course certificate at the end of the full course, which may be a thing that an auditor will be looking for. Any specific requirements in the MDR that relates to the PRRC role then? Yes, some at least. And according to me, those are that, of course, the MDR is quite a massive regulation. So don't be scared if you don't get the grip of all of it at first glance. There are actually quite a few guidance documents available out there to support you in understanding the MDR. And in the full course, I will talk more about those. Another relevant example of an MDR requirement is EUDAMED, not a defined requirement for the PRRC to manage EUDAMED, but I guess it will also impact the PRRC role, since the registration of devices as done in EUDAMED is linked to the declaration of conformity, which is one of the PRRC's responsibilities. EUDAMED is this new pan-European database for economic operators and devices, and as a PRRC, you need to be registered in EUDAMED together with the manufacturer you are the PRRC for. Then the UDI, or unique device identifier, is linked to EUDAMED, and this is a quite massive topic on its own. As a PRRC, you will probably be working with UDI to some extent, mainly since at least the Basic UDI-DI is needed for the declaration of conformity, which is the PRRC responsibility to draw up. Then we have EMDN, another interesting abbreviation. EMDN stands for European Medical Device Nomenclature. This is especially important for manufacturers of class IIb devices, since this is crucial for the sample size of the technical documentation when you apply for MDR assessment with a notified body. And as the PRRC, you are responsible for setting up the technical documentation. So this is also somewhat related to the PRRC role. And in MDR, we have article 10, and article 10 introduces some requirements that are very important. The main takeaway from this article is that all medical device manufacturers shall have a QMS, a quality management system, including, among others, a process for product realisation, post-market surveillance system, or short PMS, and vigilance management. The PRRC is responsible for checking that the manufactured products are in accordance with the QMS under which they were manufactured. And this is very much under the bullet point G here. It is also the PRRC's responsibility to ensure that the PMS requirements are followed and the reporting obligations of vigilance is done in a correct way. Just for clarification, having a QMS also applies to class I manufacturers. However, you don't need a notified body if you only have class I products, but having a quality management system applies to importers and distributors as well, to some extent. And these importers and distributors are some types of what we call economic operators that also needs to follow the MDR. Then we have something called periodic safety update reports, or PSUR. These can be seen as the results and output of the post-market surveillance plan, and they need to be documented and made available. Since the PRRC is responsible for PMS activities, this requirement will also fall on the PRRC. We also have the General Safety and Performance Requirements, or just GSPR. This is a comprehensive 14-page part of the MDR that covers general and specific device requirements applicable to all medical device classes. Here are a few interesting requirements under the GSPR. You need to write the word "medical device" on the label or use a symbol from a harmonised standard to indicate this. There is, for example, requirements regarding flammable or explosive substances that you can find under 14.3 in the GSPRs. There are actual limits for some harmful substances, like carcinogenic or mutagenic substances under 10.4.1. Another example is that devices shall be designed and manufactured in such a way that adjustment, calibration, and maintenance can be done safely and effectively. This according to 14.4. The GSPRs are related to the PRRC since they are an essential part of the technical documentation, which the PRRC is responsible for setting up. So let's have a quick look at the MDR. This regulation was published by the European Commission on the 5th of May 2017 to replace the old directives. It entered into force 20 days later, meaning the 26th of May 2017, and it shall apply from the 26th of May 2021. That is the famous date of application, or DOA. And this is what it actually looks like. If you still have medical devices on the market that were correctly CE marked before the date of application, you can keep them on the market as long as you basically don't change them. And those MDD devices are allowed to stay on the market until the last of December 2028, or last of December 2027 if it is an implant or class III device. Those were the major things in the MDR that I wanted to highlight in relation to the PRRC role. Let's look at the actual responsibilities of the PRRC then. These are the main responsibilities of the PRRC as defined in article 15 in the MDR. In the full course, I will go through these responsibilities and how to work with them in details. But for now, I will just go briefly into the details of the first requirement, which is probably also the requirement that will be most often applied, since it relates to releasing products from manufacturing. This is what parts of a typical manufacturing process could look like. And here it's quite obvious that the PRRC is not just responsible for controlling that the actual machining, assembly, or packaging is done in accordance with the QMS requirements. Lot of manufacturers seem to think that the PRRC only needs to sign off on the product release form to ensure that the production records are filled in correctly. But I would say that the PRRC has a much broader responsibility. The requirement related to the PRRC in the MDR is that the PRRC is responsible for ensuring that the conformity of the device is appropriately checked in accordance with the quality management system under which the devices are manufactured. And the requirements of the QMS do not only include product release, but rather a lot of different activities. This means that the PRRC needs to have good understanding of the manufacturer's QMS, and he or she needs to have access to supplier evaluation records and purchasing documentation also, just to mention a few. Therefore, it's wise to include the PRRC in the procedures of your QMS, and for smaller manufacturers, it can be efficient to include the PRRC directly into the SOPs to ensure that the PRRC is updated, aligned, and confident that their responsibilities are fulfilled. For a large manufacturer, it might not be plausible to include the PRRC in detail in every process or SOP. Then it can be good to instead have a specific PRRC review activity stipulated, much like the management review activity. In this case, the PRRC will call for regular meetings where the persons responsible for specific processes provide reports on their management and output of the various processes. Independent on how you manage the responsibilities of the PRRC, you need to remember to specify the required qualifications and potential training needed, as well as the responsibilities and authorities in the PRRC's job description. These authorities may include the power to say stop or delay a release in case the PRRC is not confident that the manufacturer is fulfilling all its regulatory obligations. And this is what a PRRC job description could look like, including responsibilities, authorities, and qualifications. That was a very short introduction to the PRRC role as required by the MDR. Thanks for watching this short course. This is a quite big subject when you start to dig into it and all the requirements, but I hope that I have made you interested in learning more. And if you are, then check out the full course Introduction to Person Responsible for Regulatory Compliance on medicaldevicehq.com.
Select your course plan
ONLINE
YOU ARE HERE
€ 349
Average completion time 5-14 hours
Total video duration 3.5 hours
CPD points 10
Number of quizzes 15
Final exam
Course certificate
Ask the instructor
Digital course companion
6 months access to the course
ONLINE LIFETIME
€ 449
Average completion time 5-14 hours
Total video duration 3.5 hours
CPD points 10
Number of quizzes 15
Final exam
Course certificate
Ask the instructor
Digital course companion
Lifetime access to the course and instructor
IN-HOUSE TRAINING
CONTACT US
Tailored training to meet your company's needs
Course overview
This self-paced online course is specialised to the needs of the PRRC (Person Responsible for Regulatory Compliance) according to Article 15 of the EU MDR. It will deal with the requirements and how to ensure the PRRC fulfils their responsibilities.
Participants will learn how to work with the MDR, the obligations of the manufacturer, the PRRC specific responsibilities, and post market surveillance.
The course is relevant for PRRCs or persons needing to understand the requirements related to the PRRC role.
The online course is made up of pre-recorded videos, quizzes, and a final exam. There is also a downloadable course companion within the course.
If you purchase the ‘Online’ course plan you will have access to the course for 6 months from enrolment. If you purchase the ‘Online lifetime’ course plan you will have lifetime access (conditions apply).
Pontus Gedda is a dedicated medical device specialist that has worked both in the industry, as a design engineer and project manager, and in the notified body world as a medical device lead auditor and manager.
He has vast experience in the MDR and its implementation through hands-on experience from implementing the MDR at a notified body and leading that notified body through a joint assessment and getting designated as an MDR notified body.
He was a senior manager at a notified body during the transition from MDD to MDR and also a member of the NB-MED group.
Benefits for you
Become confident in how to perform the work of a PRRC according to the MDR
You will learn about how to fulfil the PRRC obligations regarding checking products from production and how to ensure the technical documentation is complete according to the MDR.
PMS requirements and its related PMCF activities are also covered.
Training effectiveness and record-keeping
Participants’ knowledge is assessed through pre-training quizzes and a final exam, enabling a true measure of the training’s effectiveness.
Furthermore, we provide records, including the final exam score and course certificate, to satisfy ISO 13485 requirements, ensuring compliance and accountability.
Self-paced and bite-sized learning
Our interactive online courses offer the flexibility to learn at your own pace. The high-quality videos are designed in bite-sized segments, making it easier to grasp and retain information.
This format provides a convenient alternative to traditional classroom courses accommodating different learning styles and preferences.
Course modules
- Welcome
- What you need to know
- Set your course goal completion date
- Pre-course assessment quiz
- The regulatory field
- The structure of MDR – Part 1
- The structure of MDR – Part 2
- The terms and definitions
- General Obligations of the manufacturer – Part 1
- General Obligations of the manufacturer – Part 2
- Person Responsible for Regulatory Compliance (PRRC) – Part 1
- Person Responsible for Regulatory Compliance (PRRC) – Part 2
- PRRC Production – Part 1
- PRRC Production – Part 2
- GSPR – Part 1
- GSPR – Part 2
- Technical documentation – Part 1
- Technical documentation – Part 2
- Declaration of Conformity and CE marking
- Post Market Surveillance (PMS) – Part 1
- Post Market Surveillance (PMS) – Part 2
- Vigilance
- Pre-final exam
- Final exam
- Course evaluation
- Learn more in a live virtual class
- The virtual class product
- Get your questions answered on the live virtual class
Frequently asked questions
The course is not a webinar. This online course is made up of carefully scripted pre-recorded videos to maximize your learning. You can watch it as many times as you like, whenever and wherever you want. You can not download the course though, thus you will need to have an internet connection to take the course.
All in all, the average time to complete the course is 5-14 hours. Please note, you don’t have to watch the whole course at once. In fact you can pause, resume and replay as often as you like. The only limitation is the final exam, where you will only have one shot.
If you purchase the ‘Online’ course plan you will have access to the course for 6 months from enrolment. If you purchase the ‘Online lifetime’ course plan you will have lifetime access to the course if you complete the final exam within 6 months of enrolment (conditions apply).
You need to have contact with our servers for your results to register on the final exam. If your computer for some reason has a problem and does not allow you to send the result of the final exam to our servers, we recommend that you take a photo or a “print screen” of the screen with your results. E-mail this image to us and we will investigate if you have successfully completed the exam and therefore should receive a course certificate even though the result has not been registered, or if you have to do the final exam again.
There is no pass/fail on the final exam (as long as you complete it within the time frame). Your result will be printed on the course certificate which means you can be really proud of your result if you get between 90% and 100% of the answers correct!
The course certificate is available for download after completing the final exam. All you need to do is log in to your account, go to My Courses and scroll down. You will find it under Your Course Certificates.
Yes, you can download a course companion within the online course. It contains a selection of key slides from the course and is in PDF format.
We offer a number of payment methods including credit card, GooglePay, ApplePay, PayPal, wire transfer/invoice depending on the country you are buying from. If you cannot find your country on the list at checkout or you are not given wire transfer as a payment method, you can submit your order via our invoice order form.
Yes, you can. The course is in HTML5 format which will play on any new iOS or Android devices.
If you purchase five seats for the same online course at the same time, we will give you one extra seat for free on that same course (e.g. buy 5 get 6, buy 10 get 12, etc). The free seat is assigned manually after the order has been received.
The course is personal, that means you buy a license for one person. It is also really inexpensive compared to any traditional course with the same scope. If you have more than one person needing the course, please purchase another seat on the course.
The instructor has worked for a notified body for many years and has participated in NB-MED and expert groups which is probably the highest qualification you can have in this area.
There are no pre-requisites for this course.
Medical Device HQ is proud to be an accredited CPD provider, demonstrating our commitment to your continued professional development with high-quality training courses.
A CPD record showcases your professional growth, boosts confidence in your abilities, and can be presented to management for better career opportunities.
As a participant of a CPD certified course, you will receive a certificate awarding you CPD points following completion of the training.
Upon completion of the course, you are awarded 10 PD points.
Your course certificate will display the exact number of CPD points. Read more.
Reviews
Stoddard Manufacturing Co Ltd
Cicor Nordic Engineering
Cacto Health
Group purchase
If you wish to purchase two or more seats on the same online course, click the ‘Buy multiple seats’ button below which will take you to the product page where you can simply enter the number of seats you require.
If you purchase three seats or more on the same online course at the same time, you will be added to the Professional Plan for free. This means a group account will be created for you that you can manage. You will be able to track the participant’s course progress from your group account and view quiz results.
It is the person that places the order who will be our single-point-of-contact and group leader for the group account. If you wish to change this to someone else later on, you can email us at support@medicaldevicehq.com.